recommend products
200Nm agricultural gearbox describes a compact, high-reliability transmission solution that you can use to power small to medium agricultural implements. When you evaluate gearbox options, focus on torque rating, gear ratio, shaft interfaces, materials, and maintenance requirements so you secure dependable field performance and predictable service life.
You should treat the 200Nm agricultural gearbox as a specification that sets the gearbox’s continuous torque capacity. For applications such as light tillage, small augers, seeders, and some rotary implements, a 200Nm gearbox provides a balance of compact size and sufficient torque to handle routine farm tasks. Pay attention to input speed, gearbox ratio and intended duty cycle — these factors determine whether a 200Nm-rated gearbox meets your real-world load and duty requirements.
When you source a 200Nm gearbox for tractors, evaluate how the unit addresses three commercial priorities:
Durability: Look for hardened gearing, quality bearings, robust seals and tested housings to reduce downtime and repair costs.
Compatibility: Confirm shaft types, spline counts, PTO or input flange compatibility, and recommended RPM ranges to avoid mismatches during installation.
Total cost of ownership: Compare warranty terms, serviceability, spare parts availability, and field-repair practices that affect lifecycle cost.
For each candidate 200Nm agricultural gearbox, check the following technical details and ensure they align with your equipment specification:
Continuous torque rating: Confirm continuous (not only peak) torque capacity and any derating for extended duty.
Gear ratio options: Choose ratios that match implement speed requirements (for example, auger RPM, tiller blade RPM or conveyor speed).
Shaft and coupling interfaces: Verify output shaft diameter, keyway or spline details, and recommended coupling type.
Housing material and protection: Select cast-iron or treated aluminum housings based on weight and corrosion resistance needs.
Bearings and seals: Specify roller bearings and high-quality seals to resist water, dust and abrasive snow or soil ingress.
Lubrication & maintenance: Confirm factory-fill lubricant type, service intervals, and ease of access for routine checks.
In practice, you will find the 200Nm agricultural gearbox for rotary tiller and the 200Nm PTO gearbox widely used in:
Compact rotary tillers and soil conditioners where moderate torque and compact dimensions are required.
Small grain augers and light-duty grain transportation gearbox assemblies for farm-level handling.
Light-duty post-hole and auger drives fitted to compact tractors and utility vehicles.
Snow-blower and yard equipment where torque at low speed is needed in a compact package.
To ensure the right match, you should take these steps:
Document the implement’s required operating RPM and torque at the driven shaft.
Confirm the tractor PTO or prime mover input speed and allowable torque transmission method.
Request gearbox performance curves, gearbox derating tables, and recommended duty cycles from the supplier.
Ask about optional customizations such as alternate gear ratios, input flange configurations, or reinforced housings for abrasive soils.
GTM supports custom 200Nm gearbox OEM projects and can adapt input/output interfaces to your specifications.
If your application leans toward heavier usage, consider a high-torque 200Nm farm gearbox variant with upgraded bearings, thicker gear faces and enhanced lubrication. For rotary implement applications, a tailored 200Nm agricultural gearbox for rotary tiller configuration may include specific input speeds and gear ratios to maintain blade speed under load. GTM can supply both standard and reinforced configurations to suit production runs and aftermarket requirements.
You should implement a practical maintenance regime to protect the gearbox’s rated torque and extend service life:
Perform periodic oil level and contamination checks and replace lubricant per manufacturer interval.
Inspect seals and bearing play; replace worn seals immediately to prevent contamination.
Verify mounting hardware torque and alignment after initial installation and at regular service intervals.
Keep a small stock of critical spares such as seals, bearings and shear pins for field repairs.
When you work with GTM for a 200Nm PTO gearbox or production supply, you gain these commercial advantages:
Founded in 1997 with an annual gearbox output exceeding 350,000 units, GTM has production scale to support both sample and volume orders.
Quality management certified by ISO9001 and IATF16949, and proprietary IP with multiple patents underpinning gearbox designs.
OEM and ODM capability: you can request custom 200Nm gearbox OEM specifications, including bespoke gear ratios, housing finishes and shaft interfaces.
Commercial terms tailored for B2B buyers: flexible MOQ options, standard 2-year warranty, and spare parts support for export markets in North America and Europe.
Before you commit to a supplier, ensure the following items are confirmed in writing:
Rated continuous torque (200Nm) and any peak/short-time ratings.
Gear ratios offered and acceptable RPM range for your application.
Complete dimensional drawing with shaft/bolt patterns.
Warranty scope, lead time, MOQ and after-sales support details.
Compatibility testing or prototype samples for critical applications.
If you require a dependable 200Nm agricultural gearbox for production or replacement, GTM can provide technical consultation, prototype samples and volume quotations. Include your target duty cycle, input speed, shaft interfaces and expected annual order volume when you request a quote.
Contact GTM for a 200Nm Gearbox Quote
Related Information
